Filter
Top Products
125
Picture and Sound Controls
Adjusting the audio
Adjusting the audio
Muting the sound
Press the MUTE button to partially reduce (1/2 Mute) or turn off
(Mute) the sound. Each time you press the MUTE button, the mute
mode changes in the following order: 1/2 Mute, Mute, Volume, 1/2
Mute, etc.
If the closed caption mode is set to Off when you select MUTE
mode, the closed caption feature becomes active if the TV program
is closed captioned. To mute the audio without activating the closed
captioning, press the VOL (-) button to set the volume to 0.
If you modify items in the SOUND menu while Mute is active, Mute
is cancelled.
Selecting stereo/SAP broadcasts
The MTS (multi-channel TV sound) feature is only available for
analog signals on the ANT/CABLE input. When the TV receives a
stereo or SAP (second audio program) broadcast, the icon STEREO
or SAP appears on screen when the INFO button is pressed.
To listen in stereo sound:
1 Press the MENU button. Select SETTINGS, SOUND, and
then MTS.
2 Press the ( / arrow) buttons to select Stereo, and then press
the EXIT button.
❖ You can typically leave the TV in Stereo mode because it outputs
the type of sound being broadcast (stereo or monaural).
❖ If the sound is noisy, select Mono.
❖ If there is no sound in SAP mode, select Stereo.
Adjusting the audio balance
You can adjust the audio balance.
1 Press the MENU button. Select SETTINGS, SOUND, and
then Balance.
2 Press the ( / arrow) buttons to adjust the balance, and then
press the EXIT button.
NOTE
NOTE