Filter
Top Products
137
Advanced features
Setting up the Network
2 Press the ( / arrow) buttons to select Advanced Network
Setup, and then press the OK button.
3 Press the ( / arrow) buttons to select IP Address Setup,
and then press the OK button.
4 Select Auto Setup. Press the ( / arrow) buttons to select
Off.
5 Press the ( / arrow) buttons to highlight IP Address. Then
press the OK button.
6 Press the ( / arrow buttons to select the IP Address field
and use the 0-9 buttons to enter in a digit. Use the ( arrow)
button to select the subsequent fields. To save the setting, press
the OK button.
IP address field numbers must be between 0 and 255. If you input an
incompatible number and press the OK button. The field number will
be reset to the previous value.
7 Press the ( / arrow) buttons to highlight Subnet Mask, and
edit in the same way as IP Address.
8 Press the ( / arrow) buttons to highlight Default Gateway,
and edit in the same way as IP Address.
If you manually set the IP address, you must not use the same IP
address for any other device. The IP address you use should be a
private address. If you do not know the correct values to use, contact
your network administrator or internet service provider.
DNS Setup
❖ When the DHCP function of the router connected to this TV is
Off, set Auto Setup to Off, and manually set the DNS address(es).
Your Internet Service Provider should have provided these to
you.
❖ The settings in Auto Setup are linked to those selected in the IP
Address Setup menu. If Auto Setup is set to On, then Auto Setup
in the IP Address Setup menu will also be set to On.
Auto setup:
1 Press the MENU button. Select NETWORK > Network
Setup, and then press the OK button.
NOTE
NOTE
NOTE