Filter
Top Products
Operation
108
Exiting Sequence Mode
Press SEQUENCE for two seconds or longer to exit the Sequence mode.
Using a Mouse During Live Monitoring
You can use a mouse instead of the front panel buttons to perform many of the DVR
functions. The following operations are supported when using a mouse during live
monitoring.
Figure 4-3 Mouse Menu
Table 4-2 Mouse Functions
Mouse Tool Action
Left mouse button When in one of the multi-view formats (for example, PIP, 2x2, 3x3 or 4x4),
clicking this mouse button on a camera image switches that camera to
full screen.
Clicking the mouse button again returns to the previous multi-view
format.
Mouse wheel When in one of the multi-view formats, scrolling the mouse wheel up and
down operates the same as pressing the DISPLAY button by switching
the screen format between PIP, 2x2, 3x3 and 4x4.
Right mouse button Clicking the right mouse button displays the menu seen in Figure 4-3.
Table 4-3 Right Mouse Button Menu Functions
Option Function
Freeze Freezes the image.
PTZ… Allows you to control cameras with Pan, Tilt, and Zoom capabilities.