Filter
Top Products
Configuration
52
Setting Up the LAN
1. Highlight the LAN tab. The LAN (Manual) Setup screen displays.
Figure 3-24 LAN (Manual) Setup Screen
2. Highlight the field beside Type and press . You can select the type of network
configuration from: Manual, DHCP, and ADSL (with PPPoE).
Select the desired type and press .
Configuring the LAN Parameters Manually
1. Select Manual from the LAN Type field to set up LAN parameters manually.
Note You need to get the appropriate IP Address, Gateway, and
Subnet Mask values from your network administrator.
2. Press to select the field. A white box appears over the adjustable field.
3. Change the numbers by highlighting them and using the UP and DOWN arrows
to increase or decrease the number.
The factory default LAN settings are:
IP Address:192.168.1.129
Gateway:192.168.1.254
Subnet Mask:255.255.255.0
4. Highlight the field beside DNS Server. Press the UP and DOWN arrows to set the
IP address of the DNS server.
5. Highlight the Port Number Setup… field and press . The Port Number Setup
screen appears.