Filter
Top Products
Configuration
Document 800-00918 Rev E 59
12/07
Configuring Notification Callback Settings
Highlight the Callback tab. The Callback screen appears.
Note You can use the domain name instead of the IP address if you already set up the DNS Server
when setting up the LAN.
Port Highlight the field beside Port and press . Use the arrows to enter the SMTP
Server port number obtained from your system administrator. The default port
number is 25.
Use SSL/TLS Highlight Use SSL/TLS and press to toggle between On and Off. When it is
On, the DVR can send an email via an SMTP server requiring SSL (Secure
Sockets Layer) authentication.
Authentication 1. Highlight the field beside Authentication and press . An Authentication
screen appears.
2. Highlight Use and press to toggle between On and Off.
3. Highlight the field beside User/Password and press . Use the virtual
keyboard to enter the user ID and password.
Sender Highlight the field beside Sender and use the virtual keyboard to enter the sender's
e-mail address.
Note The e-mail address must include the "@" character to be a valid address.
Recipient Highlight the field beside Recipient and use the virtual keyboard to enter the
recipient's e-mail address.
Table 3-7 Notification Mail Setup Screen Options
Option Action