Filter
Top Products
Configuration
88
The DVR can be set to react to video loss differently for each camera. Each camera can:
• be associated with other cameras
• trigger an Alarm-Out connector
• sound the DVR internal buzzer
• notify a number of different devices
• move PTZ cameras to preset positions
• and/or display a camera on a SPOT monitor
Setting the Sensitivity for Video Loss
1. Highlight Video Loss in the Event menu and press . The Video Loss setup
screen appears.
Figure 3-63 Video Loss Settings Screen
2. Highlight the slider bar beside Check Obscuration, and use the LEFT and RIGHT
arrows to adjust the setting. The sensitivity can be set from Never to 15 (extremely
sensitive).
Actions 1 Tab settings
In the Video Loss Actions 1 tab, you can choose the cameras, the Alarm-Out output
connectors, and the notification actions for each camera.
Highlight the Actions 1 tab. The Video Loss Actions 1 screen displays.