Filter
Top Products
Operation
Document 800-00918 Rev E 123
12/07
Figure 4-15 Event Log Search Option Screen
You can search video from the first to last recorded images, or you can set the start and
stop times and dates.
2. Select your search options.
Table 4-9 Event Log Search Options
Option Action
From Highlight the box beside From and then press to toggle between On
and Off. When set to Off, you can enter a specific Date and Time. When set
to On, the DVR finds the first recorded image.
To Highlight the box beside To and then press to toggle between On and
Off. When set to Off, you can enter a specific Date and Time. When set to
On, the DVR finds the last recorded image.
Check Time Overlap Highlight the box beside Check Time Overlap and then press to
toggles between On and Off. You can only turn the Check Time Overlap on
or off if a user-defined date and time is set in the From and To fields.
If the DVR date and time have been reset, it is possible for the DVR to have
more than one overlapping start and stop times. When set to On, you are
asked to select one of the overlapping start and stop time. When set to Off,
the DVR displays search results from all start times to all stop times.
Alarm-In Highlight the field beside Alarm-In and then press . You can select the
alarm inputs that you want to include in your search.
Motion Highlight the field beside Motion and press . You can select the
cameras for which you want any reports of motion detection.