Filter
Top Products
Configuration
Document 800-00918 Rev E 33
12/07
7 MENU/CAMEO Button Press MENU/CAMEO to enter the Setup screen. You
need to enter the authorized user password to access
Setup. Press MENU/CAMEO to close the current
menu or setup dialog box. In the Playback mode,
press MENU/CAMEO to display the Search menu.
Press and hold MENU/CAMEO for two seconds or
longer to enter the cameo mode. The yellow outline
around the video indicates the active cameo.
Press the arrows to move the active cameo.
Press the desired camera button in the active cameo
to edit the cameo and display the video of selected
camera.
Press (Play/Pause) to exit the Active Cameo
mode. You can also exit the Active Cameo mode by
selecting Exit Group Edit in the cameo menu that
displays when you press MENU/CAMEO.
8 GROUP/SEQUENCE Button When in the live mode, press GROUP/SEQUENCE to
change the screen from the current camera group to
the next camera group. The screen displays the page
number.
Press and hold GROUP/SEQUENCE for two seconds
or longer to display live channels sequentially.
9 ZOOM/PTZ Button Press ZOOM/PTZ to zoom in the current image to
double its size on the screen. You can use the arrows
to move the rectangle to another area. Press to
zoom in on the image in the rectangle.
Press and hold ZOOM/PTZ for two seconds or longer
to enter the PTZ (Pan/Tilt/Zoom) mode. The PTZ icon
flickers. Press ZOOM/PTZ again to exit the PTZ mode.
Press the arrows or MENU/CAMEO to control
cameras that are properly configured.
10 ALARM Button The ALARM button has two functions:
• It resets the programmed DVR outputs including
the internal buzzer during an alarm.
• It displays the event log when you are in the live
monitoring mode, unless there is an active alarm.
This operation can be protected by a user
password.
11 CLIP COPY Button Press CLIP COPY to copy video clips.
12 PANIC Button Press PANIC to start panic recording of all camera
channels. The icon displays on the screen. Press
PANIC again to stop panic recording.
Table 3-1 16-Channel DVR Front Panel Controls
Position Control Function