Filter
Top Products
Chapter 2 Names and Functions of Parts
2-6 (E) 2-2 System Setup Panel
LOCAL: The internal video processor is controlled
by the VIDEO PROCESS control (o) on this
unit.
q REMOTE button
This switches the currently selected port between the
REMOTE and LOCAL modes. The button lights in
REMOTE mode, and goes off in LOCAL mode.
REMOTE: This unit is controlled by the device
connected to the REMOTE IN connector.
LOCAL: This unit is controlled only from the
optional BKMA-505 Control Panel.
2-1-2 Blank Panel
The blank panel in the lower part of the front panel
accommodates the optional BKMA-505 Control Panel.
For details of this control panel, see Section 1-4, “Optional
Accessories” (page 1-4).
2-2 System Setup Panel
To operate the system setup panel, raise the blank panel until it is horizontal.
System setup panel
Accessing the system setup panel
CONTROL PANEL
PANEL SELECT CHARACTER
REAR FRONT
1 2 3
NONE
ACCESS
MEMORY CARD
OFF ONBOTH
METER
PANEL
CONTROL
PANEL
SETUP
SELECT
a POWER switch
System setup panel
b CONTROL PANEL connector
c CONTROL PANEL switch
d MEMORY CARD slot
e SET UP SELECT switch
f PANEL SELECT switch
g CHARACTER switch