Filter
Top Products
Chapter 3 Preparations
3-42 (E) 3-5 Superimposed Character Information
3-5 Superimposed Character Information
When the CHARACTER switch on the system setup panel is turned ON, time
values and text information indicating the operating mode are superimposed on
the signals output from the SDI (SUPER) and ANALOG COMPOSITE (SUPER)
MONITOR OUT connectors. The text information can also be superimposed on
the P1, P2, P3 VIDEO OUT (COMPOSITE) B connectors by making a setting in
the Setup menu.
Note
To control the signal output from the ANALOG COMPOSITE (SUPER)
terminal, specify SWITCH in Setup menu item 008 ANALOG MONITOR
SUPERIMPOSE. This enables you to switch the output signal on and off by using
CHARACTER SW.
Character adjustment
You can adjust the position, size, and style of the superimposed characters in the
setup menu.
For details, see Section 3-4, “Setup” (page 3-18).
Displayed information
Notes
• The above example shows the display with the factory default settings.
By changing setup menu item 005 DISPLAY INFORMATION SELECT, you
can change the type of time value shown in the second line.
• If the EE state is enabled when monitoring the P1 port in the DTR+Panel mode
or the P1/P2 ports in the DTR+DTR mode, the time value display in a above
changes to R1/R2 port data.
• When outputting EE in the Panel mode, time data is displayed at a above and
the playback port data is left as it is.
P
E
SHUT LE ST I L L
TCR.23:59.40.18*
a Time value type
Time value
b Timecode reader drop-frame indication
c Timecode generator drop-frame indication
d VITC data field indication
e Selected port
f PB/EE state
g Operation mode h File name display
Displayed information