Filter
Top Products
Chapter 3 Preparations
3-34 (E) 3-4 Setup
633
634
635
BI
INT / EXT Determines whether the time code generated by the time code generator, or whether the
externally supplied time code is used for the record time code.
INTERNAL : Time code generated by the Time Code Generator is used.
: Externally supplied time code is used.
REC RUN / FREE RUN Sets the timing for the start of transfer of the TCG regenerate.
: Transfer starts with REC.
FREE RUN : Normal transfer.
REGEN SOURCE Sets the TC for generation of the original TCG.
: Generates from the LTC.
VITC : Generates from the VITC.
BINARY GROUP Sets the user bit specifications of the time code generated by the Time Code Generator.
: Not specified : Character set not used.
001 : ISO character : 8-bit characters in compliance with ISO646, ISO2022
010 : Unassigned-1 : Undefined
011 : Unassigned-2 : Undefined
100 : Unassigned-3 : Undefined
101 : Page/line : SMPTE262M Page/Line Multiplex System
110 : Unassigned-4 : Undefined
111 : Unassigned-5 : Undefined
636
637
638
BI
REC VITC SELECT R1
REC VITC SELECT R2
REC VITC SELECT R3
Sets whether the time code can be output from the VITC time generator when recording
is loaded.
on : Switches to the VITC of the time code generator.
: Records the VITC of the input signal.
639
640
641
BI
REC VITC POSITION R1
REC VITC POSITION R2
REC VITC POSITION R3
Selects two lines to insert VITC during recording.
SUB MENU
SELECT 1
SELECT 2
NTSC : 10 Line .. .. .. 20 Line
PAL : 7 Line .. .. .. 22 Line
642
643
644
BI
PB TC REPLACE P1
PB TC REPLACE P2
PB TC REPLACE P3
These items select the data that is output as VITC and LTC during playback.
: Output VITC and LTC from the recorded material.
LTC : Output LTC from the recorded material for LTC and VITC.
TM2 : Output TM2 from the recorded material for LTC and VITC.
645
646
647
BI
PB VITC POSITION P1
PB VITC POSITION P2
PB VITC POSITION P3
These items select two lines for inserting VITC during playback.
(This items are valid only if LTC and TM2 were selected in items 642 to 644.)
NTSC : 10 Line .. .. .. 19 Line
PAL : 7 Line .. .. .. 22 Line
SUB MENU
SELECT 1
SELECT 2
670
671
BI
LTC SELECT R1
LTC SELECT R2
These items select what to use as LTC input.
: SYSTEM TIME CODE .. Selects the system time code.
LINE INPUT : LINE INPUT .. Selects the LTC that is input to each port.
When the configuration is 3 input/1 output, the R3 port is fixed to SYSTEM TIME
CODE.
679
BI
PB LTC OUTPUT Selects the player port's LTC output mode.
: Outputs the LTC (speed 1x) of the current location.
stop muting : When playback is stopped or paused, LTC output is muted.
701
702
BI
INPUT SETUP REMOVE R1
INPUT SETUP REMOVE R2
(only in 525 mode)
These items turn SETUP removal from the recording signal on or off.
off
704
705
706
BI
OUTPUT SETUP P1
OUTPUT SETUP P2
OUTPUT SETUP P3
(only in 525 mode)
These items specify whether to add SETUP to composite video output.
off
Expansion menu items (Continued)
Item number Display indication Settings Description
EXTERNAL
REC RUN
LTC
000
off
16 Line 18 Line
19 Line 21 Line
off
16 Line 18 Line
19 Line 21 Line
SYSTEM TC
normal
on
on