Filter
Top Products
Appendixes
Error Messages A-1 (E)
Appendixes
Error Messages
If a malfunction or internal system error/warning occurs
and the MAV-555SS unit fails to function properly, the
SYSTEM indicator or HDD indicator on the front panel
lights up red. In addition, when an error occurs, an error
message immediately appears on the time data display on
the front panel. When a warning occurs, you can check the
details by pressing the HELP button.
If an error or warning occurs, refer to the list below and, if
a remedy is indicated, follow the instructions given.
Errors and warnings can often be corrected by turning the
POWER switch off and then back on again.
If an error or warning still occurs after restarting the unit,
please contact the company from which you purchased the
unit.
Error
Power Trouble
Meaning: Detected a malfunction in the power supply
unit.
Power supply may be defective.
EM Board Not Respond
Meaning: Normally: Detected a malfunction in
communications between the
EM-3 Board and other boards.
Thought to be an EM-3 Board
malfunction.
When booting:Failed to boot the EM-3, DM-
127, or FM-81 board. A board
may be defective.
FM Board Not Respond
Meaning: Detected a malfunction in communications
between the FM-81 Board and other boards.
The FM-81 Board may be defective.
R1 Port Not Respond
Meaning: Detected a malfunction in communications
between R1 port control and other boards.
The DM-127 Board may be defective.
R2 Port Not Respond
Meaning: Detected a malfunction in communications
between the R2 port control area and other
boards.
The DM-127 Board may be defective.
R3 Port Not Respond
Meaning: A communications problem was detected
between the R3 port controller and the other
boards.
The DM-127 Board may be defective.
P1 Port Not Respond
Meaning: An abnormality has been detected in a data
transfer between the P1 port control area and
another board.
The DM-127 Board may be defective.
P2 Port Not Respond
Meaning: Detected a malfunction in communications
between P2 port control and other boards.
The DM-127 Board may be defective.
P3 Port Not Respond
Meaning: A communications problem was detected
between the P3 port controller and the other
boards.
The DM-127 Board may be defective.
SLOT3 Not Respond
Meaning: Detected a malfunction in communications
between the optional BKMA-540 and some
other board.
The BKMA-540 may be defective.