Filter
Top Products
Chapter 3 Preparations
3-4 Setup 3-31 (E)
301
BI
STANDARD COMPOSITE This item selects either STD or NON-STD in accordance with the composite input
signal.
: Automatically determines whether the luminance signal and color
temperature signal in the input video signal are interleaved or not.
Sets STD mode if they are interleaved, sets NON-STD mode if they
are not interleaved.
forced STD : Set this mode when STD mode is to be used at all times.
forced non-STD : Set this mode if the color framing of the input video signal is
unstable.
302
303
304
BI
AUDIO FADE MODE P1
AUDIO FADE MODE P2
AUDIO FADE MODE P3
Specifies audio processing for the join between cuts produced by editing.
Note: For editing from the control panel (BKMA-505), BVE mode editing is
enabled only for the TIME setting, and the TYPE is set for close fade.
SUBMENU
TYPE X : Cross fade
V: V fade
: No fade
TIME 20 m sec
2msec
4msec
5msec
6msec
307
BI
ANALOG AUDIO EDIT
PRESET REPLACE
When editing digital audio on the MAV-555SS through a remote controller or an editor
(such as the BVE-600) that does not have the functions that control the digital audio edit
presets, this item sets the assignment of the channels to the editor's or remote controller's
analog audio presets.
This setting can be made for all digital audio channels.
SUBMENU
CH 1
CH 2
CH 3
CH 4
nodef : No setting.
ch1 : Follow the analog channel 1 edit presets.
ch2 : Follow the analog channel 2 edit presets.
ch1+2 : Follow either the analog channel 1 edit presets or the analog channel 2 edit
presets.
The default values for each channel are: CH1:ch1, CH2:ch2, CH3:nodef, and
CH4:nodef.
317
B
PANEL MODE RECORDER
PORT
Sets the RECORDER port for editing from the BKMA-505 in the Panel mode.
: Uses R1, P1 Port as the RECORDER port. The external device can be
selected as the Player only on EXT1.
R2P2 : Uses R2, P2 Port as the RECORDER port. The external device can be
selected as the Player only on EXT2.
320
BI
MAVE-F555 CONTROL Sets control of MAVE-F555 when it is connected.
SUB MENU
FILE CHANGE TIME Sets the time to output an image after a key is released when using the -/+ keys for file
switching.
0s .. .. 0.9s
DECISION BASE Sets the standard for A/V Split editing from the MAVE-F555.
: Audio is split with Video as standard.
audio : Video is split with Audio as standard.
GPI EP1 TIME(F)
GPI EP2 TIME(F)
Performs offset control for the IN point of the GPI output. (GPI OUTPUT
CONFIGURATION item (menu 224)).
-90 .. .. +90
Notes: • When the player is an external VTR or when performing DMC editing,
the PREROLL TIME + GPI EPx TIME must be set so that it exceeds 2
seconds plus 2 frames.
• When trimming, the GPI EPx TIME must be set so that it exceeds -28
frames (in 525 mode. -23 frames in 625 mode). In other editing situations,
PREROLL TIME + GPI EPx TIME must be set so that it exceeds 2
frames.
Expansion menu items (Continued)
Item number Display indication Settings Description
auto
CUT
1msec
R1P1
0.3s
video
00