Filter
Top Products
Chapter 2 Names and Functions of Parts
2-10 (E) 2-3 Connector Panel
SDI (SUPER) connector
This outputs a serial digital video/audio signal.
The audio output signals output by this connector are
as follows:
CH1: Audio monitor output. Same as the Lch
signal.
CH2: Audio monitor output. Same as the Rch
signal.
CH3: No output
CH4: No output
If the CHARACTER switch on the system setup
panel is set to ON, timecode information and menu
settings appear as text superimposed on the video
signal.
ANALOG (COMPOSITE) (SUPER) connector
This outputs an analog composite video signal.
If the CHARACTER switch on the system setup
panel is set to ON, timecode information and menu
settings appear as text superimposed on the video
signal.
l DSK IN connectors
When the optional BKMA-560 is installed, the DSK
VIDEO signal is input to the VIDEO connector and
the DSK KEY single is input to the KEY connector.
m SDTI CP connectors
These connectors cannot be used.
n SDI IN (Serial Video/Audio Input) connectors
(BNC type)
The left jack inputs serial digital video/audio signals.
When the power is on, signals that are input to the
jack on the right is output through an internal circuit,
making a bridge connection possible in SD mode.
A maximum of three inputs are available.
o SDI OUT (Serial Video/Audio Input)
connectors (BNC type)
These jacks output serial digital video/audio signals.
A maximum of three outputs are available.
p Ground terminal
Connect to ground as required.
q - AC IN connector
Connect to a power outlet using the power cord (1-
776-997-11) (sold separately).