Filter
Top Products
Chapter 3 Preparations
3-5 Superimposed Character Information 3-43 (E)
a Time value type
Note
If the time data is not read correctly, the asterisk mark is
displayed: “T*R”, “T*R.”
b Timecode reader drop-frame indication
A period (“ . ”) indicates drop-frame mode (factory
default).
A colon (“ : ”) indicates non-drop-frame mode.
c Timecode generator drop-frame indication
A period (“ . ”) indicates drop-frame mode (factory
default).
A colon (“ : ”) indicates non-drop-frame mode.
d VITC data field indication
A blank indicates fields 1 and 3.
An asterisk (“ * ”) indicates fields 2 and 4.
e Selected Port
The currently selected port (R1, P1, R2, P2 or RP) is
displayed. Also, when an external device is selected,
“T1” or “T2” is displayed.
When RP is selected in BVE mode while monitoring
R1, a small ‘P’ is displayed; and while monitoring P1,
a small ‘R’ is displayed.
f PB/EE Status
If the EE state is enabled when monitoring the
playback port, a small ‘E’ is displayed here. This is
not displayed when an external device is selected.
g Control VTR indication
This part of the display is in two parts, A and B.
• Part A: operating mode
•Part B: tape speed
Note
* Displayed only when an external device has been specified.
h File Name Display
When superimposing on the VIDEO OUT (COMPOSITE)
B terminal, the name of the file (up to 16 characters)
loaded on the port can be displayed using the lower half of
the display.
Additional information displayed in the
BVE mode
When conducting nonlinear editing in the BVE mode, the
port name of the port being monitored, IN point, OUT
point, duration, edit channel, and the edit mode are
displayed. The position of the display is set with the “323
Linear Edit Message” item in the Setup menu.
For details, see description of initial settings in Section 3-4, “Setup”
(page 3-18).
Indication Meaning
TCR Timecode value from LTC reader
TCR. Timecode value from VITC reader
UBR User bits from LTC reader
UBR. User bits from VITC reader
TM1 Time value for TM1
TM2 Time value for TM2
TCG LTC generator timecode value
TCG. VITC generator timecode value
UBG LTC generator user bit value
UBG. VITC generator user bit value
Indications
Operating mode
Part A Part B
STOP Stopped
F.FWD Fast forward
REW Rewind
PLAY LOCK Play
REC LOCK Recording
JOG STILL Still playback in jog mode
JOG FWD Forward playback in jog mode
(N indicator lights)
JOG REV Reverse playback in jog mode
(n indicator lights)
SHUTLE (speed) Shuttle mode
VAR (speed) Variable mode
PREROL Preroll mode
EDIT LOCK Edit mode
STANDBY OFF* Standby off mode
TAPE UNTHREAD* Cassette not installed
AB