Filter
Top Products
Appendixes
A-6 (E) Specifications
AUDIO OUTPUT(AES/EBU)
CH1/2, CH3/4
BNC (2) ×3 ports
Complies with AES-3id-1995
ANALOG AUDIO OUTPUT
CH1/2/3/4
XLR, 3-pin, female (4) ×3 ports
+4 dBm (with 600 Ω load), low
impedance, balanced
(with optional BKMA-570 (J)
connected)
MONITOR OUTPUT (L/R)
XLR, 3-pin, male (2)
+4 dBm (with 600 Ω load), low
impedance, balanced
TIME CODE OUTBNC (1) ×3 ports
2.2 Vp-p (with 600 Ω load), low
impedance, unbalanced
PHONES JM-60 stereo phones jack
-∞ to -12 dBu (with 8 Ω load),
unbalanced
Remote connectors
REMOTE IN 1/2/3/4
D-sub 9-pin, female ×4 (supports Sony’s
9-pin VTR protocol and DISK
protocol)
REMOTE IN/OUT 1/2
D-sub 9-pin, female ×2, for external
VTR control (compatible with SONY
9PIN VTR protocols)
REMOTE PARALLEL I/O
D-sub 50-pin, female ×1, 24 inputs (5 V
CMOS), 24 outputs (open collector)
Ethernet* RJ45 ×1, 10 Base T
SPARE D-sub 9-pin, female ×1
Video CONTROL
D-sub 25 pins, female ×1, video process
control playback system (total of 3
independent ports)
* Ethernet is a registered trademark of the XEROX
Corporation.
Memory Card (sold separately)
Compatible memory cards: ATA flash card (PCMCIA 2.0
(JEIDA 4.1), PCMCIA ATA 1.02, Type 2-compatible)
Capacity: at least 8 MB
Recommended products: “MemoryStick” +
adapter
PC card adapter: MSAC-PC2N
“MemoryStick”: MSA-8AN (8 MB)
Supplied accessories
Operation Manual (1)
Installation Manual (1)
Optional accessories
Control Panel BKMA-505
Control Panel Case Kit BKMA-506
AD/DA Converter Board BKMA-513
Video Effect Board BKMA-560
Video Effect Expansion Board BKMA-561
Analog Audio Expansion Unit BKMA-570
Rack Mounting Kit RMM-555
Editing Panel MAVE-F555
Dial Panel MAVE-D555
Editing Fader Panel BKNE-1011
In the interests of continuing product development,
specification and external appearance are liable to change
without prior notice.
Printed on recycled paper