Filter
Top Products
Appendixes
A-4 (E) Specifications
Specifications
General
Power supply voltage
100 to 240 V AC, 50/60 Hz
Current consumption
100 V : 5.5 A, 240 V : 2.3 A
(with all options installed)
Operating temperature
+5°C to +40°C (41°F to 40°F)
Peak inrush current
(1)Power ON, current probe method:
70 A (240 V), 30 A (100 V)
(2)Hot switching inrush current,
measured in accordance with
European standard EN55103-1: 60 A
(230 V)
Storage temperature
–20°C to +60°C (–4°F to 140°F)
Humidity 20% to 90%
Mass Approx. 50 kg (110 lb) (with all options
installed)
Dimensions 424 × 265.6 × 631 mm (16.75 × 10.5 ×
24.8 in.) (width/height/depth)
(excluding projections)
Operation
Recording/playback time
SS mode Maximum 6 h 20 min. (Bit rate: 30 Mbps,
Audio: 16 bit/sample)
Approx. 4 h 50 min (Bit rate: 40 Mbps,
Audio: 20 bit/sample)
Approx. 3 h 40 min (Bit rate: 50 Mbps,
Audio: 20 bit/sample)
SD mode Maximum 19 h 20 min. (Bit rate: 30
Mbps, Audio: 16 bit/sample)
Approx. 14 h 40 min (Bit rate: 40 Mbps,
Audio: 20 bit/sample)
Approx. 11 h 20 min (Bit rate: 50 Mbps,
Audio: 20 bit/sample)
Search speed
SS mode Shuttle mode: Stationary, ± 500 times
normal speed
Jog mode: -3/3 to 3/3 times normal speed
Variable mode: -3/3 to 3/3 times normal
speed
SD mode Shuttle mode: Stationary, ± 500 times
normal speed
Jog mode: -2 to 2 times normal speed
Variable mode: -2 to 2 times normal
speed
Cue-up time Minimum 0.5 s
Shortest time difference when sending
60 frames
Port configuration
In SS mode: 1 input/1 output
In SD mode: Select 3 input/1 output, 2 input/2 output,
or 1 input/3 output on the menu
Digital video system
Codec
Compression Complies with MPEG-2 4:2:2 Profile @
Main Level, GOP N=1
Bit rate 50 Mbps, 40 Mbps, 30 Mbps, selectable
Encoding samples
Y: 720/line
B-Y/R-Y: 360/line
Encoded lines 525: 7-262, 270-525
625: 7-310, 320-623
Digital video signal format
Sampling frequency
Y: 13.5 MHz
R-Y/B-Y: 6.75 MHz
Quantization 8 bits/sample
Digital inputs and outputs
Frequency rangeY: 0.5 to 5.75 MHz +0.5/-0.75 dB
R-Y/B-Y: 0.5 to 2.75 MHz +0.5/-0.75 dB
Analog composite input/output
(with optional BKMA-513 installed)
Frequency rangeY: 0 to 4.2 MHz +0.5/-0.5 (NTSC)
0 to 4.8 MHz +0.5/-1.0 (PAL)
Signal-to-noise ratio
53 dB or more
Differential gain 2% or less
Differential phase
2° or less
Y/C delay 20 ns or less
K factor (2T pulse)
1% or less
Output SCH phase
Complies with RS-170A/CCIR R.624-3
LF nonlinearity 3.0% or less (includes quantization
noise)
Digital audio system
Digital audio signal format (channels 1 to 4)
Sampling frequency
SDI: 48 kHz
(synchronous with video)
AES/EBU: 48 kHz
(not synchronized with video)
Quantization 20 bits/sample, 16 bits/sample, selectable