Dell Remote Access Controller 4 Firmware Version 1.30 Universal Remote User Manual


 
222 DRAC 4 Property Database Group and Object Definitions
www.dell.com | support.dell.com
where <senMask> has the following bit definitions:
Bit-0: 1 = Send alert for informational events (such as a return to lower severity range or normal).
Bit-1: 1 = Send alert for warning (noncritical) events.
Bit-2: 1 = Send alert for critical events.
Bit-3: Reserved.
where <statMask> has the following bit definitions:
Bit-0: 1 = Send alert when system transitions to a powered-on state.
Bit-1: 1 = Send alert when system transitions to a powered-off state.
Bit-2: 1 = Send alert when watchdog timer detects a system hang.
Bit-3: Reserved.
Alert Filter Properties
The alert filter property group ID is cfgUserAdmin. The object IDs are shown in Table B-5.
Table B-4. System-Generated Alert Mask Bit Definitions
Bits Data Type
28–31 System undefined reserved
24–27 System undefined reserved
20–23 System undefined reserved
16–19 System status alerts <statMask>
12–15 System miscellaneous sensor <senMask>
8–11 System fan sensors <senMask>
4–7 System voltage sensors <senMask>
0–3 System temperature sensors <senMask>
Table B-5. Alert Filter Property Group and Object IDs
GroupID Object ID Object Default Value
cfgUserAdmin cfgUserAdminPageEmailEnable FALSE
cfgUserAdmin cfgUserAdminPageEmailAddress ""
cfgUserAdmin cfgUserAdminPageEmailCustomMsg ""
cfgUserAdmin cfgUserAdminAlertFilterRacEventMask 0x777777
cfgUserAdmin cfgUserAdminAlertFilterSysEventMask 0x777777
cfgRemoteHosts cfgRhostsSmtpServerIpAddr 0.0.0.0