Dell Remote Access Controller 4 Firmware Version 1.30 Universal Remote User Manual


 
58 Managing and Recovering a Remote System
www.dell.com | support.dell.com
Logging Out
Click Log Out in the upper-right corner of the main window.
NOTE: The Log Out button does not appear until you log in.
Adding and Configuring DRAC 4 Users and Alerts
To manage your system with the DRAC 4, you may want to create unique users with specific
administrative permissions (role-based authority). You can also configure alerts to be emailed to
different users.
This section provides instructions about how to perform the following tasks:
Adding and Configuring SNMP Alerts
Configuring the DRAC 4 NIC
Adding and Configuring SNMP Alerts
Adding and Configuring DRAC 4 Users
1
Click the
Configuration
tab and select
Users
.
2
In the
User Name
column, click
[Available]
.
3
Use the
Add/Configure DRAC 4 User
page to configure the user name, password, access
permissions, and email alert settings for a new or existing DRAC 4 user.
Configuring a New User Name and Password
Use Table 4-1 to configure a new or existing DRAC 4 user name and password.
Configuring User Permissions
Under User Permissions, click the User Group drop-down menu and select the permissions
group for the user.
Use Table 4-2 to determine the User Group (permissions) for the user.
Table 4-1. User Properties
Property Description
User Name Allows you to specify a DRAC 4 user name. (Once the user name is specified,
you cannot change it. Every user must be created with a different user name.)
NOTE: User names on the local DRAC 4 must not contain the / (forward slash) or
. (period) characters.
Password Allows you to specify or edit the DRAC 4 user's password.
Confirm New Password Requires you to retype the DRAC 4 user's password to confirm.