Filter
Top Products
127
Chapter 4: Using the Logic Analyzer in Eye Scan Mode
Setting Up and Running Eye Scan Measurements
4. Assign pod A2 to the analyzer:
• In the analyzer's Format tab select the Pod Assignment button.
•Drag the A2 pod from the Unassigned Pods section to the Analyzer
section.
• Select Close.
5. Define a label for the K clock on the master card (the qualifier input). This
will make it easier to see which signal is used as the qualification signal.
The qualifier can be in its own label and/or it can be part of a multi-channel
label. The label will be displayed on the eye scan Qualifier tab.
NOTE: Be sure that the thresholds are set correctly!