Filter
Top Products
156
Chapter 5: Reference
The Sampling Tab
Timing Mode
When you select Timing Mode, the Timing Mode Controls area appears.
Conventional/
Transitional
Configuration Lets you configure the timing analyzer to use memory for
all samples (conventional) or just samples that are
different than previously stored sample (transitional).
Trigger Position Lets you specify where the sample that triggered the
analyzer should appear among all the other samples that
are stored in acquisition memory.
Acquisition
Depth Lets you use a smaller portion of the acquisition memory
and speed up processing of the captured data.
Sample Period Lets you specify how often the logic analyzer samples
signals from the device under test. In the 800 MHz / 64M
Sample Conventional configuration, the sample period is
fixed at 1.25 ns.
See Also “Selecting the Timing Mode (Asynchronous Sampling)” on page 43