Filter
Top Products
20
Chapter 1: Getting Started
Probing and Sampling Mode Selection Steps
To assign pods to the logic analyzer
1. In the Format tab, select the Pod Assignment button.
2. In the Pod Assignment dialog, drag a pod to the appropriate logic analyzer.
3. Select the Close button.
To specify threshold voltages
The threshold voltage is the voltage level that a signal must cross
before the logic analyzer recognizes a change in logic levels.
1. In the Format tab, select the button under the pod name.
2. In the Pod threshold dialog, select a Standard, External Ref, Differential,
or a User Defined threshold voltage.
3. Select the Close button.
4. Select the Clk Thresh button.
5. In the Clock Thresholds dialog, select the button of the clock whose
threshold you wish to set.
6. In the J, K, etc., threshold dialog, select a Standard, Differential, or a User