179
Chapter 5: Reference
The Trigger Tab
maximum width specifications.
• Find Nth occurrence of an edge
Becomes true when the specified edge occurs in the specified number of
samples.
• Find pattern present/absent for > duration
Becomes true when the specified pattern is present or absent for greater
than the amount of time specified.
• Find pattern present/absent for < duration
Becomes true when the specified pattern is present or absent for less than
the amount of time specified.
• Run until user stop
Sets up to never trigger. You must select the stop button to view the
captured data.
• Find 2 edges too close together
Becomes true when the second specified edge occurs within a specified
time after the first specified edge.
• Find 2 edges too far apart
Becomes true when the second specified edge does not occur within a
specified time after the first specified edge.
• Find pattern occurring too soon after edge
Becomes true when a specified pattern occurs within a specified time after
the first specified edge.
• Find pattern occurring too late after edge
Becomes true when a specified pattern does not occur within a specified
time after the first specified edge.
• Find glitch
Becomes true when the specified glitch occurs in one sample.
• Wait t seconds
Becomes true when the specified amount of time has expired.