Filter
Top Products
158
Chapter 5: Reference
The Sampling Tab
State Mode
When you select State Mode, the State Mode Controls area appears.
State Speed
Configuration Lets you configure the state analyzer for faster sampling,
but with half of the channels.
Trigger Position Lets you specify where the sample that triggered the
analyzer should appear among all the other samples that
are stored in acquisition memory.
Acquisition
Depth Lets you use a smaller portion of the acquisition memory
and speed up processing of the captured data.
Clock Setup Lets you specify the clock mode. Set the mode to Periodic
if the clock is a fixed frequency clock that is always
running. Set the mode to Aperiodic if clock frequency
varies or is bursted. The clock setup also lets you specify
the clock edge from the device under test that will be used