Filter
Top Products
99
Chapter 3: Using the Logic Analyzer in Timing or State Mode
Displaying Captured Data
3. In the filter terms, assure the default pattern of all "Don't Cares" (Xs).
This configuration will always transfer all data from acquisition
memory. While this configuration will increase the time of each run, it
will guarantee that repetitive run data is available regardless of when it
is stopped.
To display symbols for data values
You can display data in symbolic form in some of the display tools, such
as the Listing display and the Waveform display.
To view symbolic values in a waveform display
1. Select the label name where you want to display symbolic values.
2. Select Properties....
3. In the Properties dialog:
• Set ShowValue to On.
•Set Base to Symbols or Line#.
• Select the OK button.
The symbolic names for the values now appear in the overlaid bus
waveform.
To view symbolic values in a listing display
1. Select the numeric base of the label where you want to display symbolic
values.
2. Set the numeric base to Symbols or Line#.
The symbolic names for the values now appear instead of numeric data.
See Also “Using Symbols” on page 101