Filter
Top Products
229
Chapter 5: Reference
Specifications and Characteristics
Maximum state data rate supported: 1250 Mb/s
Mating connector: Agilent part # 1253-3620 (see note 1)
Minimum voltage swing: Vpos - Vneg >= 200 mV p-p
Input dynamic range: -3.0 Vdc to +5 Vdc
Threshold accuracy: +/- (30 mV +1% of setting) (see note 4)
Threshold range: -3.0 V to +5 V
User-supplied threshold range: N/A
User-supplied threshold input
resistance: N/A
Threshold control options: If operated single-ended (minus inputs
grounded) the threshold can be adjusted
from the user interface.
Maximum non-destructive input voltage: +/- 40 Vdc
Maximum input slew rate: 5 V/ns
Clock input: Differential
Number of inputs (see note 5): 17 (16 data and 1 clock)
Note 1: A support shroud, Agilent part # 16760-02302 (for
boards up to 0.062 in. thick) or 16760-02303 (for
boards up to 0.120 in. thick) is recommended. A kit
containing 5 shrouds and 5 connectors is available
as Agilent part # 16760-68702 (for boards up to
0.062 in. thick) or 16760-68703 (for boards up to
0.120 in. thick).
Note 4: The threshold specified in the user interface
is added to the difference between the negative
and positive differential inputs.
Note 5: Refer to the specific modes of operation for
details on how inputs can be used.
E5379A Input Equivalent Circuit
E5380A MICTOR-Compatible Probe
Specifications and Characteristics
NOTE: All specifications are marked by "*" (asterisk).
Input resistance and capacitance: (refer to figure below)
Maximum state data rate supported: 600 Mb/s
Mating connector: AMP MICTOR 38 (see note 2)
Minimum voltage swing: 300 mV p-p
Input dynamic range: -3.0 Vdc to +5 Vdc
Threshold accuracy: +/- (30 mV +1% of setting)
Threshold range: -3.0 V to +5 V
User-supplied threshold range: N/A
User-supplied threshold input
resistance: N/A
Threshold control options: Adjustable from UI
Maximum non-destructive input voltage: +/- 40 Vdc