Filter
Top Products
63
Chapter 2: Probing and Selecting the Sampling Mode
Formatting Labels for Logic Analyzer Probes
“To assign probe channels to labels” on page 60
“To import label definitions from an ASCII file” on page 63
To import label definitions from an ASCII file
You can create label names and assign logic analyzer probe channels by
importing label definitions from an ASCII file.
1. In the Format tab, select File from the menu; then, select the Import
Labels... menu item.
2. In the File Selection dialog, select the name of the file that contains the
label definitions.
3. Select OK.
Up to 126 labels can be defined. Label names can be up to 20
characters long (additional characters are truncated). A maximum of
32 channels can be assigned to a label.
When updating labels by importing label definitions, make sure that the
labels are turned ON. Labels that are not active will not be updated.
Label Definition File
Format
Label definition files have one definition per line, where each line has
the format:
label_name;pod_name[channel_list];pod_name[channel_list] ...
In a channel list, individual channels are separated by commas (","),
and a range of channels is separated by a colon (":").
Examples
To assign label name "Blue" to channel 5 on pod A2:
Blue;A2[5]
To assign label name "Green" to channels 5 through 2 and channel 0 on
pod A2:
Green;A2[5:2,0]
To assign label name "Yellow" to channel 1 on pod A2 and channel 0 on
pod A1:
Yellow;A2[1];A1[0]