Filter
Top Products
22
Chapter 1: Getting Started
Timing Mode or State Mode Steps
Timing Mode or State Mode Steps
When you have selected the timing or state sampling modes, you need
to perform the following steps.
• “Step 4. Define the trigger condition” on page 22
• “Step 5. Run the measurement” on page 23
• “Step 6. Display the captured data” on page 24
Step 4. Define the trigger condition
The trigger is the event in the device under test that you want to
capture data around.
1. In the Trigger tab, and in the Trigger Functions subtab, choose the type of
trigger you want to specify, and select the Replace button.