Filter
Top Products
19
Chapter 1: Getting Started
Probing and Sampling Mode Selection Steps
Step 3. Format labels for the probed signals
When a logic analyzer probes hundreds of signals in a device under
test, you need to be able to give those channels more meaningful
names than "pod 1, channel 1".
The Format tab is mainly used for assigning bus and signal names
(from the device under test) to logic analyzer channels. These names
are called labels. Labels are also used when setting up triggers and
displaying captured data.
The Format tab also lets you do things like assign pods to the logic
analyzer and specify the logic analyzer threshold voltage.
The Format tab has activity indicators that show whether the signal a
channel is probing is above the threshold voltage (high), below the
threshold voltage (low), or transitioning.