Filter
Top Products
133
Chapter 4: Using the Logic Analyzer in Eye Scan Mode
Displaying Captured Eye Scan Data
Displaying Captured Eye Scan Data
Once you have run an eye scan measurement, captured measurement
data is displayed as eye diagrams in the Eye Scan display.
The Eye Scan display has the following measurement tools: slope,
limits, 4 point, 6 point, diamond, histogram, and cursors. You can also
display measurement information in text format.
The Eye Scan display can be scaled, and there are several display
options.
• “To open the Eye Scan display” on page 133
• “To select the channels displayed” on page 134
• “To scale the Eye Scan display” on page 135
• “To set Eye Scan display options” on page 136
• “To make measurements on the eye scan data” on page 142
• “To display information about the eye scan data” on page 149
• “To comment on the eye scan data” on page 151
See Also “Selecting the Eye Scan Mode” on page 55
“Setting Up and Running Eye Scan Measurements” on page 119
“Saving and Loading Captured Eye Scan Data” on page 152
“Understanding Eye Scan Measurements” on page 259
To open the Eye Scan display
The Eye Scan display shows the results of the eye scan measurement.
1. From the Window menu, select your logic analyzer and choose the Eye
Scan... menu item.