Filter
Top Products
64
Chapter 2: Probing and Selecting the Sampling Mode
Formatting Labels for Logic Analyzer Probes
To assign label name "Orange" to channels 15 through 5 on pod A3,
channel 5 on pod A2, and channel 6 on pod A1:
Orange;A3[15:5];A2[5];A1[6]
To assign label name "Red" to the K clock of the logic analyzer in slot A:
Red;CK[AK]
See Also “To assign probe channels to labels” on page 60
“To import label names and assignments from a netlist” on page 62
“To export label definitions to an ASCII file” on page 64
“To turn labels off or on” on page 66
To export label definitions to an ASCII file
1. In the Format tab, select File from the menu; then, select the Export
Labels... menu item.
2. In the File Selection dialog, select the name of the file that will contain the
label definitions.
3. Select OK.
See Also “To assign probe channels to labels” on page 60
“To import label names and assignments from a netlist” on page 62
“To import label definitions from an ASCII file” on page 63
To change the label polarity
While negative logic is rare in circuits (the main exception at this time
is RAMBUS), you can change the label polarity if the device under test
uses negative logic.
1. In the Format tab, select the polarity button (next to the label button) to
toggle between positive (+) and negative (-) polarity.