Filter
Top Products
MVP-8400i Modero Viewpoint Wireless Touch Panel With Intercom
2
MVP-8400i 8.4" Modero® ViewPoint® Touch Panel with Intercom
Specifications
The MVP-8400i panel utilizes an 8.4" Color Active LCD to display an 800 x 600 pixel resolution using 256K
colors.
FIG. 2 MVP Touch Panels
MVP-8400i Specifications (FG5965-04)
Dimensions (HWD): 7.09" x 10.47" x 1.47" (18.00 cm x 26.60 cm x 3.73 cm)
Power Requirement
(without charging):
Panel with batteries fully charged or with no batteries:
• Constant current draw: 1.3 A @ 12 VDC
• Startup current draw: 1.9 A @ 12 VDC
• If panel is mounted onto a TDS or WDS, add 0.1 A to the above figures.
Power Requirement
(while charging):
Panel while charging batteries:
• Constant current draw: 3.3 A @ 12 VDC
• Startup current draw: 3.9 A @ 12 VDC
• If panel is mounted onto a TDS or WDS, add 0.1 A to the above figures.
Minimum power
supply required:
PS4.4 Power Supply (FG423-45)
- All MVP models are shipped with this power supply.
Power Modes: • ON: Panel is fully functional.
• STANDBY: Panel uses low power, the LCD/backlight is shutdown, LEDs
still function. Panel resumes the ON mode in ~ 1 second.
• OFF: On-board programs not running, touch screen still powered, LED
not functional. Panel resumes the ON mode in ~ 30 seconds.
Battery Duration:
(per battery)
• Eight hours of normal use (25% On state, 25% Standby, and 50% Off).
• Four hours of continuous use (continuous On state).
The MVP-8400i panel is shipped with two MVP-BP batteries. You must use
both batteries to obtain the duration times given above.
Memory (factory default): • 128 MB SDRAM
• 128 MB Compact Flash (upgradable to 1 GB) - factory programmed
Docking station interface connector
Speaker
Power connector
Directional pad w/center select button
Mini-USB connector
Stylus
Pushbuttons (4)
C
C
Microphone