Filter
Top Products
Setup Pages
61
MVP-8400i 8.4" Modero® ViewPoint® Touch Panel with Intercom
Wireless Settings
The options on the Wireless Security: Simple Mode and Wireless Security: Enterprise Mode windows allow you to select
from the wireless security methods supported by the NXA-WC80211GCF Wi-Fi card. These security methods
incorporate WPA, WPA2, and EAP technology (some of which require the upload of unique certificate files to a target
panel).
Refer to the Appendix B - Wireless Technology section on page 163 for more further information.
Some encryption and security features may/may not be supported depending on the type of wireless card being used:
Refer to the Configuring a Wireless Network Access section on page 14 for more information on configuring the panel
for wireless network access using the various security options.
Wireless Security: Enterprise Mode (Cont.)
Password: Press this field to enter a password for wireless access in the Password
keypad. (NOTE: this field is greyed out when selecting EAP-TLS as a Security
Type.)
Certificate Authority: Press this field to enter the file location for a Certificate Authority certificate in
the Certificate Authority (CA) keypad.
PEAP Version: This field is only enabled when selecting EAP-PEAP as a Security Type. Press
this field to cycle between the available installed versions of PEAP.
Inner Auth. Type: This field is only enabled when selecting EAP-PEAP or EAP-TTLS as a
Security Type. Press this field to cycle between MSCHAPv2, GTC, OTP, and
MD5.
Client Certificate: This field is only enabled when selecting EAP-TLS as a Security Type. Press
this field to enter a file location in the Client Certificate File Location keypad.
Private key: This field is only enabled when selecting EAP-TLS as a Security Type. Press
this field to enter a file location in the Client Private Key File Location keypad.
Private Key Password: This field is only enabled when selecting EAP-TLS as a Security Type. Press
this field to enter the password for the private key in the Private Key Password
keypad.
Auto PAC Provisioning: This field is only enabled when selecting EAP-FAST as a Security Type. Press
this field to enable or disable the use of PAC files.
PAC File Location: This field is only enabled when selecting EAP-FAST as a Security Type, and
only when Auto PAC Provisioning is Disabled. Press this field to enter a file
location in the PAC File Location keypad.
Auto Key Renewal: This field is blocked out, but will read "NEVER" when selecting EAP-FAST as a
Security Type.
Cancel/Save: Press the Cancel button to return to the Wireless Settings Page without saving
any changes. Press the Save button to save all changes and return to the
Wireless Settings Page.
Wireless Security Support
802.11g Wi-Fi CF card: • Open (Clear Text)
• Static WEP (64-bit and 128-bit key lengths)
• WPA-PSK
• EAP security (with and without certificates)
• WAP SIte Survey