Filter
Top Products
NXA-CFSP Compact Flash
9
MVP-8400i 8.4" Modero® ViewPoint® Touch Panel with Intercom
6. Insert the new card firmly into the slot opening connector (FIG. 7) until the contact pins are completely inside the
card and securely attached to the pin sockets.
FIG. 7 Removing/installing a Compact Flash Memory card
Any new Compact Flash card upgrade is detected by the panel only after the unit
cycles power.
Card removal
grooves
Insert with arrow
facing towards the pins
On-board Compact
Flash connector (with pins)
Connector opening