Filter
Top Products
Setup Pages
64
MVP-8400i 8.4" Modero® ViewPoint® Touch Panel with Intercom
Refer to the Configuring a Wireless Network Access section on page 14 for further details on these security
options.
Refer to the Using the Site Survey tool section on page 18 for more information on using this feature.
WPA-PSK Settings
WPA-PSK security is designed for environments where is it desirable to use WPA or WPA2, but an 802.1x
authentication server is not available. PSK connections are more secure than WEP and are simpler to configure since
they implement dynamic keys but share a key between the WAP and the panel (client).
Using WPA-PSK, the encryption on the WAP could either be WPA or WPA2. The firmware in the panel will
automatically connect to the WAP using the correct encryption. The WPA encryption type is configured on the WAP, not
in the firmware.
WAPs do not display “WPA” or “WPA2” on their configuration screens:
WPA is normally displayed as TKIP.
WPA2 is normally displayed as AES CCMP.
The following fields are required: SSID and Password/Pass Phrase.
Enter the SSID of the WAP.
Enter a pass phrase with a minimum of 8 characters and a maximum of 63.
The exact same pass phrase (including capitalization) must be entered in the access point.
Refer to the Configuring a Wireless Network Access section on page 14 for details on these security options.
Refer to the Using the Site Survey tool section on page 18 for more information on using this tool.
WPA-PSK Settings
SSID (Service Set Identifier): Opens an on-screen keyboard to enter the SSID name used on the target
WAP.
The SSID is a unique name used by the WAP, and is assigned to all panels
on that network. An SSID is required by the WAP before the panel is
permitted to join the network.
• The SSID is case sensitive and must not exceed 32 characters.
• Make sure this setting is the same for all points in your wireless network.
• NXA-WAP200Gs use AMX as their default SSID.
• If this field is left blank, the panel will attempt to connect to the first
available WAP.
Password: Opens an on-screen keyboard to enter a passphrase (password).
• This alpha-numeric string must use a minimum of 8 characters and a
maximum of 63.
• The exact pass phrase string (including capitalization) must be entered
on the target WAP.
Save/Cancel: • Save - store the new security information, apply changes, and return to
the previous page.
• Cancel - discard changes and return to the previous page.