Filter
Top Products
Setup Pages
74
MVP-8400i 8.4" Modero® ViewPoint® Touch Panel with Intercom
Other Settings
The Other Settings button provides a menu to select the Image Caching page, Password Setup page, or SIP Settings page.
Select any option to access its page.
Cache Settings Page
The Cache Settings page (FIG. 60) configures the allocation of memory for image caching. The G4 graphics engine
caches images to decrease load time of previously viewed images. RAM caching is always enabled, and images (static,
dynamic. and DynaMo
™
) are stored in the RAM cache as they are viewed. The size of RAM cache is automatically
configured to take into account available memory versus memory that may be needed by the panel later. As the RAM
cache approaches its maximum size, the oldest items in the cache may be discarded to make room for newer items. If
Flash caching is enabled, dynamic images that would have been discarded will be moved to Flash, since it is typically
faster to retrieve images on Flash than across a network (although it is slower than RAM cache). Note that since static
images are already stored on Flash, they are never moved to the Flash cache, so Flash caching applies only to dynamic
images. Images in Flash cache are moved back to RAM cache the next time they are viewed. As the Flash cache
approaches its maximum size, the least recently used items may be discarded to make room for new items.
Flash memory can be allocated for image caching, but RAM cache is always enabled. Flash memory is a secondary
cache and is much slower than RAM cache, as it uses Compact Flash to store images. Flash memory should not be used
frequently, but it may be appropriate to use Flash memory in some environments that are dynamic image intensive, at
G4 Web Control Page (Cont.)
Maximum Number of
Connections
Displays the maximum number of users that can be simultaneously connected
to this panel via VNC. Default = 1.
Current Connection Count Displays the number of users currently connected to this panel via VNC.
G4 Web Control Timeout: Sets the length of time (in minutes) that the panel can remain idle (no cursor
movements) before the G4 Web Control session is terminated.
• Minimum value = 0 minutes (panel never times out)
• Maximum value = 240 minutes (panel times out after 240 minutes)
Refer to the Using G4 Web Control to Interact with a G4 Panel section on page 29 for
instructions on using the G4 Web Control page with the web-based NetLinx Security
application.
FIG. 59 Other Settings menu