Filter
Top Products
Setup Pages
50
MVP-8400i 8.4" Modero® ViewPoint® Touch Panel with Intercom
Battery Settings
The options on this page allow you to set power warning preferences, monitor battery status information, and adjust the
display times for battery warnings. This page is populated with information from MVP-BP batteries in the panel, as well
as batteries in a connected MVP-TDS/WDS docking station (
FIG. 49).
Features on this page include:
FIG. 49 Battery Settings page
Battery Settings Page
Back: Saves all changes and returns to the previous page.
WiFi/Wired icon: The icon to the left of the Connection Status Icon displays whether the current
connection to the Master is Wireless (image of a radio antenna) or Wired
(image of three networked computers).
Connection Status icon: The icon in the upper-right corner of each Setup page shows online/offline state
of the panel to the master.
• Bright red - disconnected
• Bright green - connected. Blinks when a blink message is received to dark
green every 5 seconds for half a second then go back to bright green.
• Bright yellow - panel missed a blink message from the master. It will
remain yellow for 3 missed blink messages and then turn red. It will return
to green when a blink message is received.
Note: a Lock appears on the icon if the panel is connected to a secured NetLinx
Master.
Battery Power Brightness
Limit:
The DISABLE/DISABLED button acts as a power save feature with two options:
• Disable - activates the brightness limit set on the panel (conserves battery
power). Activating this feature causes the panel to function at 80% of full
brightness and overrides the Panel Brightness value set on the Setup
page.
• Disabled - deactivates this power save feature. The panel will use the
Panel Brightness level.
Note: This field applies to MVP-BP batteries installed in the panel.