Filter
Top Products
Setup Pages
43
MVP-8400i 8.4" Modero® ViewPoint® Touch Panel with Intercom
Protected Settings
The Protected Settings page and its contents are covered in more detail in the Protected Setup Pages on page 52.
Information
The Information button provides a menu to select either the Project Information Page section on page 44 or the Panel
Information Page section on page 45. Select either option to access that page.
Setup Page (Cont.)
Display Timeout: Indicates the length of time that the panel can remain idle before activating Sleep
mode (causing the LCD to power down).
• Press the UP/DN buttons to increase/decrease the Display Timeout setting.
Range = 0 - 240 (minutes).
• Set the timeout value to zero to disable Sleep mode.
Note: Small timeout values maximize the life of the battery charge.
Inactivity Page Flip
Timeout:
Indicates the length of time that the panel can remain idle before automatically
flipping to a pre-selected page.
• Press the UP/DN buttons to increase/decrease the Inactivity Page Flip
Timeout setting. Range = 0 - 240 (minutes).
• Set the timeout value to zero to disable Inactivity Page Flip mode.
Note: The touch panel page used for the Inactivity page flip is shown within a small
Inactivity Page field.
Panel Brightness: Sets the display brightness level of the panel.
• Press the UP/DN buttons to adjust the brightness level. Range = 0 - 100.
Note: The on-screen bargraph can be dragged to adjust the brightness level which
is then reflected as a numeric value in the Panel Brightness field.
FIG. 44 Information menu