Filter
Top Products
Setup Pages
78
MVP-8400i 8.4" Modero® ViewPoint® Touch Panel with Intercom
SIP Settings Page
The options on the SIP Settings page (FIG. ) enable you to establish network settings for using your touch panel as an IP
phone. With a CSG SIP Communications Gateway (FG2182-01, -02, -03), you can use your touch panel to make and
receive local, long distance, and international phone calls, and have access to phone features like call waiting, caller ID,
call forwarding, call queuing, and voice mail. Setting up your touch panel as a telephone requires that you set it up as one
in the CSG SIP Communications Gateway. Refer to the CSG SIP Communications Gateway Operation/Reference Guide
for information on setting up your touch panel to work as a telephone.
You may need to load a Duet module to enable the touch panel to receive SIP calls. The Duet module translates between
the standard interface and the device protocol. It parses the buffer for responses from the device, sends strings to control
the device, and receives commands from the UI module or telnet sessions. Refer to the documentation supplied with the
Duet Module for more details.
Password Settings Page (Cont.)
User Access: Use these buttons to access and modify the user name/password combinations
required for removing the panel from a docking station. The number of user
access passwords on the panel is limited only by the amount of storage
memory available.
Use the UP/DN buttons to scroll through the list of saved User Access user
names and passwords.
The Enable/Enabled button allows you to toggle between activating or
deactivating the MVP panel requirement of a user to enter a pre-defined
password before removing the panel from a connected docking station:
• Enable - does not prompt the user for a password, the docking station just
releases the panel when the security release pushbutton is pressed.
• Enabled - requires that a valid password from the User Access list be
entered before removing a panel from a docking station.
• The Report button enables/disables reporting the panel’s docking status
to the Master.
A sample UI module is provided in the module package. It is not intended to cover
every possible application, but can be expanded as needed by a dealer to meet the
requirements of a particular installation.
FIG. 62 SIP Settings Page