Filter
Top Products
Setup Pages
65
MVP-8400i 8.4" Modero® ViewPoint® Touch Panel with Intercom
EAP-LEAP Settings
EAP (Extensible Authentication Protocol) is an Enterprise authentication protocol that can be used in both wired and
wireless network environments. EAP requires the use of an 802.1x Authentication Server, also known as a Radius server.
The configuration fields described below take variable length strings as inputs. An on-screen keyboard is opened when
these fields are selected.
LEAP (Lightweight Extensible Authentication Protocol) was developed to transmit authentication information securely
in a wireless network environment.
EAP-LEAP security is designed for wireless environments where it is not required to have a client or server certificate
validation scheme in place, yet necessary to transmit data securely over a wireless network.
LEAP does not use client (panel) or server (RADIUS) certificates and is therefore one
of the least secure EAP security methods but can be utilized successfully by
implementing sufficiently complex passwords.
EAP-LEAP Settings
SSID (Service Set Identifier): Opens an on-screen keyboard to enter the SSID name used on the target
WAP.
The SSID is a unique name used by the WAP, and is assigned to all panels
on that network. An SSID is required by the WAP before the panel is
permitted to join the network.
• The SSID is case sensitive and must not exceed 32 characters.
• Make sure this setting is the same for all points in your wireless network.
• NXA-WAP200Gs use AMX as their default SSID.
• With EAP security, the SSID of the WAP must be entered. If it is left
blank, the panel will try to connect to the first access point detected that
supports EAP. However, a successful connection is not guaranteed
because the detected WAP may be connected to a RADIUS server,
which may not support this EAP type and/or have the proper user
identities configured.
Identity: Opens an on-screen keyboard. Enter an EAP Identity string (used by the
panel to identify itself to an Authentication (RADIUS) Server).
Note: This information is similar to a username used to login to a secured
server or workstation. This works in tandem with the Password string which is
similar to the password entered to gain access to a secured workstation.
Typically, this is in the form of a username such as: jdoe@amx.com.
Password: Opens an on-screen keyboard. Enter the network password string specified
for the user entered within the Identity field (used by the panel to identify itself
to an Authentication (RADIUS) Server)
Note: This information is similar to the password entered to gain access to a
secured workstation.
Save/Cancel: • Save - store the new security information, apply changes, and return to
the previous page.
• Cancel - discard changes and return to the previous page.