Filter
Top Products
Configuring Communications
21
MVP-8400i 8.4" Modero® ViewPoint® Touch Panel with Intercom
Automatically set SSID
In the Protected Setup page:
1. Select Wireless Settings.
2. Press the Site Survey button.
3. Select a WEP secured WAP from within the Wireless Site Survey page, and press the Connect button.
4. Write down the SSID name, Current Key string value, and panel MAC Address information so you can later enter it
into the appropriate WAP dialog fields in order to "sync-up" the secure connection. These values must be identically
reproduced on the target WAP.
Manually set SSID
In the Protected Setup page:
1. Select Wireless Settings.
2. In the IP Settings section, press the DHCP/Static field until it reads "Static".
FIG. 20 Site Survey of available WAPs (Secured WAP shown selected)
FIG. 21 Wireless Settings page
Select a target
WAP with the
desired level of
security
Connecting to the
WAP begins the
communication