Filter
Top Products
Setup Pages
45
MVP-8400i 8.4" Modero® ViewPoint® Touch Panel with Intercom
Panel Information Page
The Panel Information page provides detailed panel information (FIG. 46).
Project Information Page (Cont.)
AMX IR 455K Port: Displays the AMX 455 kHz IR channel port used by the IR Emitter on the panel.
IR User Def 1 Port: Displays the User Defined IR channel port used by the IR Emitter on the panel.
• Note: User Defined ports can be downloaded by the user and are
customizable, whereas the AMX ones are fixed.
IR User Def 2 Port: Displays the User Defined IR channel port used by the IR Emitter on the panel.
Build Number: Displays the build number information of the TPD4 software used to create the
project file.
Creation Date: Displays the project creation date.
Revision Date: Displays the last revision date for the project.
Last Save Date: Displays the last date the project was saved.
Blink Rate: Displays the feedback blink rate, in .10 second increments.
Job Comments: Displays any comments associated to the job (from the TPD4 project file).
Cradle Sensor Port: Displays the port assignment being used to report Cradle Sensor information.
Cradle Sensor Channel: Displays the channel assignment being used to report Cradle Sensor information.
The channel is turned on when the panel is docked (in either the TDS or WDS
docking stations.
IR receivers and transmitters on G4 panels share the device address number of the
panel.
FIG. 46 Panel Information page