AMX MVP-8400i Universal Remote User Manual


 
NXA-CFSP Compact Flash
7
MVP-8400i 8.4" Modero® ViewPoint® Touch Panel with Intercom
NXA-CFSP Compact Flash
Overview
Every MVP panel is shipped with a 128 MB Compact Flash card.
Compact Flash Card - Security
All security user names and passwords (for the docking station) are stored in the Compact Flash card. After installing the
Compact Flash card upgrade, all security user names and passwords need to be re-entered to enable security. For this
reason, it is recommended that you upgrade the card prior to setting up the security information for the docking station.
The NXA-CFSP Compact Flash card is factory programmed with panel firmware and can be upgraded up to 1GB:
Installing the NXA-CFSP Compact Flash Card
Accessing the MVP’s Internal Components
1. Remove all connectors, remove power and remove batteries.
2. Remove the two housing screws (FIG. 5).
Optional Compact Flash Upgrades
NXA-84ICF256M, 256 MB COMPACT FLASH CARD (FG2116-70)
NXA-84ICF512M, 512 MB COMPACT FLASH CARD (FG2116-71)
NXA-84ICF1G, 1 GB COMPACT FLASH CARD (FG2116-72)
Batteries should be removed prior to upgrading the Compact Flash card.
FIG. 5 Removing the MVP enclosure (housing)
Housing screws
Trim fits inside
the grooves around
the edges of the panel
Circuit board
housing
attachment
locations (4)
Bottom rim of outer
housing
Battery Compartment cover
Rear outer housing
A
B
Panel