Filter
Top Products
Setup Pages
51
MVP-8400i 8.4" Modero® ViewPoint® Touch Panel with Intercom
Battery Settings Page (Cont.)
Panel Shutdown: This value determines the number of minutes that would need to pass before
the panel automatically shuts-down. Once shutdown, the unit would have to be
restarted. The UP/DN buttons alter the timeout value (in minutes). A value of 0
disables this feature.
Range = 0, 3, 5, 10, 15, 30, 60, 120, 180, 240 default = 0.
Note: This field applies to MVP-BP batteries installed in the panel.
Low Battery Warning: The UP/DN buttons adjust the time value (in minutes) available on the battery
(for use) before the panel displays a low battery warning.
Range - 10, 15, 20, 30, 45 default = 15 min.
Note: This field applies to MVP-BP batteries installed in the panel.
Very Low Battery Warning: The UP/DN buttons adjust the time value (in minutes) available on the battery
before the panel displays a very low battery warning (indicating near-term panel
shutdown).
• Range = 3, 5, 7, 10 default = 5 min.
• This value cannot exceed the Low Battery Warning value.
Note: This field applies to MVP-BP batteries installed in the panel.
Combined Charge Status Indicates the combined power charge available from batteries installed in the
panel. This bar is light blue when connected to a power source, and turns
orange and displays the current charge when the panel is running on battery
power.
Battery One Charge Status Indicates the power charge available on the Slot 1 battery in the panel. This bar
is light blue when connected to a power source, and turns orange and displays
the current charge when the panel is running on battery power.
Battery Two Charge Status Indicates the power charge available on the Slot 2 battery (in the panel). This
bar is light blue when connected to a power source, and turns orange and
displays the current charge when the panel is running on battery power. If the
panel does not have a Slot 2 battery, this bar will be dark blue, and will turn dark
orange when the panel is disconnected from a power source.
Battery Dock 1 Charge
Status
Indicates the power charge available on the docking station’s battery #1.
Battery Dock 2 Charge
Status
Indicates the power charge available on the docking station’s battery #2.
Note: If no batteries are being charged within the docking station’s battery
compartments, or the MVP is not connected to a docking station; both Battery
Dock Charge Status fields are left blank.
Docking Station Version Indicates the firmware version currently installed on the docking station.
Battery Level Port Indicates the port being used to report charge status levels back to the NetLinx
Master (set in TPDesign4).
Battery Level Indicates the level being used to report status levels back to the NetLinx Master
(set in TPDesign4).