Filter
Top Products
11-12
User Guide for Cisco Digital Media Manager 5.2.x
OL-15762-03
Chapter 11 Register DMPs
Procedures
Procedures
• Use DMPDM to Prepare a DMP for Manual Registration, page 11-12
• Use a System Task to Normalize DMP Passwords, page 11-13
• Establish Trust Between Digital Signs and your Centrally Managed DMPs, page 11-14
• Add or Edit Address Ranges for Non-Medianet Autoregistration, page 11-15
• Delete Address Ranges for Non-Medianet Autoregistration, page 11-16
• Add or Edit One DMP Manually, page 11-17
• Delete DMPs Manually from Your Device Inventory, page 11-17
Use DMPDM to Prepare a DMP for Manual Registration
When somehow neither autoregistration type is suitable, such as for testing purposes, you can perform
the required steps manually to register a DMP in DMM. However, you must first prepare the DMP.
Procedure
Step 1 Point your browser to the IP address of a DMP that you will manage centrally.
Step 2 At the DMPDM login prompt, enter the username and the password that you configured for the DMP.
Step 3 Click DMP Management in the Administration area, and then enter the required values.
a. Enter in the DMM Appliance IP Address field the full and correct IP address of your
DMM appliance.
b. Enter in the DMM Server Timeout (in seconds) field the maximum number of seconds that your
DMP should wait for a response from your DMM appliance.
Step 4 Click Apply to confirm your entries.
Step 5 Click Save and Restart DMP in the Administration area, and then click to confirm.
Step 6 Stop. You have completed this procedure.