14-24
User Guide for Cisco Digital Media Manager 5.2.x
OL-15762-03
Chapter 14 Touchscreens, Projectors, and Displays
Reference
Supported Touchscreen Drivers
Software UI and Field Reference Tables
• Elements to Choose Configuration Settings from Menus, page 14-24
• Elements to Configure DMP Audio/Video Settings, page 14-27
• Elements to Control HDMI Display Autodetection, page 14-27
• Elements to Control Screen Resolution Autodetection, page 14-28
• Elements to Activate RS-232 for Supported LCD Display Brands (except DMTech), page 14-28
• Elements to Activate RS-232 for LCD Displays by DMTech, page 14-28
Elements to Choose Configuration Settings from Menus
Navigation Path
Either of these:
• Digital Media Players > DMP Manager > Control TV
• Digital Media Players > Advanced Tasks > DMP Audio/Video Settings
DMP Model Supported Drivers
DMP 4400G
•
3M MicroTouch
• ELO Acoustic Pulse Recognition systems and non-APR systems
• NEW IN CISCO DMS 5.2.3—ELO non-Acoustic Pulse Recognition systems
• GeneralTouch ST6001S and ST6201
• Zytronic Zybrid
DMP 4310G
• NEW IN CISCO DMS 5.2.3—
ELO non-Acoustic Pulse Recognition systems
• NEW IN CISCO DMS 5.2.3—GeneralTouch ST6001S and ST6201
Table 14-2 Elements for Menu-driven Configuration of Supported Presentation Systems
Element Description
TV Type Choose the manufacturer and the model.
Tip Other elements on this page:
• Are not available until after you choose an option from this list.
• Vary according to your choice from this list.
Name A unique and human-readable name for these settings. It is unique in the sense that you have not used
it previously as the name for anything that can be scheduled. You must enter a name.
Description A brief description. The description is optional.
Contrast A contrast setting value in the range from 0 to 100.
Set the contrast. Then, check Apply.
Brightness A brightness setting value in the range from 0 to 100.
Set the brightness. Then, check Apply.