Filter
Top Products
13-9
User Guide for Cisco Digital Media Manager 5.2.x
OL-15762-03
Chapter 13 Configure DMP Wi-Fi Settings
Reference
Q.
Can I overcome the SSID broadcast requirement if I wait until my DMP is connected before I turn off the
SSID broadcast?
A.
No. Your DMP will lose its connection to your WLAN.
Q.
What prevents my DMPs from receiving IP addresses even after they have associated to my WLAN access point?
A.
This can occur whenever you change SSID settings for your WLAN. Please restart your DMPs to
restore their connections.
Q.
How can my wireless DMP use a static IP address?
A.
Configure your wireless access point to assign the address.
Q.
Why might I see references to TKIP after I configure my DMPs to use WPA2-EAP with AES CCMP?
A.
This is a known issue. Although the Digital Signs software user interface might state that you use
TKIP, your DMP uses WPA2-EAP with AES CCMP successfully, just as you configured it to do.
Q.
Why might I see references to DHCP after I configure my DMPs to use static IP addresses on my WLAN?
A.
This is a known issue. Although the Digital Signs software user interface might state that you use
DHCP, your DMPs continue to use the static IP addresses that you configured.