Cisco Systems 5.2.x Home Theater Server User Manual


 
14-9
User Guide for Cisco Digital Media Manager 5.2.x
OL-15762-03
Chapter 14 Touchscreens, Projectors, and Displays
Procedures
Procedure
Step 1 Do only one of the following.
Step 2 Do only one of the following.
Step 3 Turn On the touchscreen.
Tip Does a message on the touchscreen say that it must download a “characterization” file? This happens only
when your touchscreen uses technologies from Elo TouchSystems and when you have never turned it On previously (or
after its CF card is reformatted). When you see this message, please disregard it. The touchscreen will obtain its
characterization file automatically during a later stage of DMP setup.
Step 4
Stop. You have completed this procedure.
Does your
touchscreen
use HDMI?
When you will use HDMI
a. Connect the HDMI cable to the HDMI interface on the back panel of
your DMP.
b. Connect the other end of the cable to your touchscreen.
Does your
touchscreen
use DVI?
When you will use DVI
a. Connect the HDMI cable to the HDMI interface on the back panel of
your DMP.
b. Fasten an HDMI-to-DVI adapter to the free end of the cable.
c. Connect the free end of the DVI adapter to the corresponding
interface on your touchscreen.
d. Plug the 3.5mm audio jack into the Audio interface on the back panel
of your DMP.
e. Connect the other end of the audio cable to the corresponding
interface on your touchscreen.
Does your
touchscreen
use USB?
When touchscreen interaction relies on USB
a. Connect a USB cable to the USB interface on the back panel of
your DMP.
b. Connect the other end of the cable to your touchscreen.
Note If your DMP model has only one USB connector, you might prefer to
connect an external hard drive there for added local storage. In this
case, an RS-232 serial cable would be the better choice for connecting
a touchscreen to your DMP.
Does your
touchscreen
use RS-232?
When touchscreen interaction relies on RS-232
a. Connect an RS-232 serial cable to the RS232 interface on the back
panel of your DMP.
b. Connect the other end of the cable to your touchscreen.