Filter
Top Products
19-36
User Guide for Cisco Digital Media Manager 5.2.x
OL-15762-03
Chapter 19 Content Distribution and Delivery
Reference
Is the ACNS channel fully configured to use an external manifest file?
1.
Log in to CDM.
2. Choose Services > Channels.
3. Click Channel Content in the table of contents.
4. Click Change Method.
5. Check Specify external manifest file, and then click Save.
6. Enter any arbitrary text in the Manifest URL text box.
7. Enter 0 (zero) in the Check Manifest Every N mins text box.
8. Click Submit.
Later, each time that you publish content from Digital Signs to ACNS, your ACNS server
automatically fills in the correct manifest location.
Have you checked if any other content acquisition problems affect the external manifest file?
1.
Log in to CDM.
2. Choose Services > Channels.
3. Click Channel Content in the table of contents.
4. Click Validate, and then consider the following while you read the validation report:
• Does any message at the end of the report say that your manifest file is correct?
• Are your Content Engines in sync with the device that hosts your manifest file?
• Does the manifest file refer to files that you use in the affected ACNS channel?
Did anyone change the Time setting for your DMM appliance, but not restart it?
You must restart your DMM appliance after the time setting is changed in AAI or in Digital
Signs. Otherwise, some scheduled deliveries might not occur.