1-3
User Guide for Cisco Digital Media Manager 5.2.x
OL-15762-03
Chapter 1 Welcome [to DMS-Admin]
Procedures
In the top-level menu for AAI, the SHOW_INFO option is highlighted by default.
Step 2 Press Enter to load the Show Info screen.
Step 3 Write down the appliance serial number that AAI shows to you.
Step 4 Stop. You have completed this procedure.
Start DMS-Admin
Procedure
Step 1 Point your browser at your DMM appliance.
• Use HTTPS and specify port 8443
OR
Use HTTP and specify port 8080— which redirects immediately to the secured HTTPS connection.
• Be sure to use the fully qualified appliance DNS name and not merely its IP address.
For example,
https://dmm.example.com:8443.